Tilbake til bloggen
Hvordan-gjøre-guider 2026-11-12 HexClad 1 visninger

How to Season a Carbon Steel Pan for Non-Stick Cooking

How to Season a Carbon Steel Pan for Non-Stick Cooking

Learn the step-by-step process to season a carbon steel pan for a natural non-stick surface. Includes care tips and product recommendations from HexClad.

Why Season a Carbon Steel Pan

Seasoning a carbon steel pan creates a natural, non-stick layer that improves with use. Unlike factory-applied coatings, a seasoned surface develops over time and can be refreshed whenever needed. The process bonds oil to the pan's surface through heat, forming a polymerized layer that food releases from easily.

Step-by-Step Seasoning Process

The following steps work for most carbon steel pans, woks, and skillets. Always check the manufacturer's instructions for your specific pan first.

  1. Clean the Pan Thoroughly: Wash the pan with hot, soapy water to remove any factory wax or protective coating. Dry it completely with a towel.
  2. Apply a Thin Layer of Oil: Use a high-smoke-point oil such as grapeseed, flaxseed, or canola. Apply a small amount to the pan and wipe it all over the cooking surface and sides. Then wipe off as much as you can — the layer should be almost invisible.
  3. Heat the Pan: Place the pan on a stovetop burner over medium-high heat. Heat until the oil just begins to smoke, indicating the polymerization process has started. Continue heating for a few minutes, then let the pan cool completely.
  4. Repeat the Process: For best results, repeat the oil-and-heat cycle three to four times. Each layer builds on the previous one, creating a more durable non-stick surface.

Seasoning a Wok or Large Pan

The same technique applies to round-bottom woks and larger pans. The key is to tilt the pan so the oil coats the entire interior surface. If you have an electric stove, you may need to heat the pan in sections to ensure even polymerization.

Product Tip: Using a Tempered Glass Lid

A tempered glass lid can help you monitor cooking without losing heat — useful when you're seasoning a pan that also needs to simmer or steam afterward.

  • Tempered Glass Lid, 7”: Our transparent tempered-glass lid, thanks to its small steam vent and stay-cool handle, allows you to keep an eye on your food without losing precious cooking heat. It’s also crack- and break-resistant. When seasoning a carbon steel pan, maintaining consistent heat is important. A lid with a vent lets you trap heat and moisture without needing to lift it, which helps the seasoning process while also being useful for other cooking tasks.
    Tempered Glass Lid, 7”
    Tempered Glass Lid, 7”

Maintenance After Seasoning

After seasoning, avoid using soap or abrasive scrubbers on the pan. Instead, rinse with hot water and use a soft brush or sponge to remove food residue. Dry the pan immediately on the stove over low heat to prevent rust. Apply a very light coat of oil before storing to protect the seasoning.

When to Re-Season

If food starts sticking or you notice rust spots, it's time to re-season. Lightly scrub the affected area with a non-abrasive pad, dry it, and apply a new oil layer using the same heat method. Regular re-seasoning keeps the pan performing well for years.

Relaterte artikler

Customer Service
Hjem
Produkter
Handlekurv
Profil